How To Clean N64 Games

How To Clean N64 Games – What’s up! Welcome to my first instructable! Do you have an old N64 that doesn’t work or is super dirty? Then this instructable is for you! In this instructable I will show you how to clean your N64 Cartridges, N64 and N64 Controllers. I’m from the Netherlands, so my English may not be great. sorry 🙂

Ok, with that out of the way, let’s get started! Now, the N64 is so simple to build that you only need a few tools.

How To Clean N64 Games

How To Clean N64 Games

The bit game is only available online for about 5 dollars. Now that we have the tools, let’s get started!

Random: Fan Transforms N64 To Play Switch Games, Complete With Cart Reader And Usb Inputs

In my case, the N64 turned on, but I did not get an image. After cleaning it worked again! This shows how simple and easy it is to repair an N64. Ok, let’s start. Before removing any screws, we need to remove the extra memory (if you don’t have it, you can skip a step). Remove the clip and carefully remove the adhesive with a flathead screwdriver. Then try to eject the memory by pushing the memory towards you and upwards. There is a special tool for this, but I don’t own it. With the memory out of the way, let’s get the rest of the N64!

Flip the N64 over and there are 6 weird Nintendo screws holding the top of the N64 to the bottom. This is the part where you really need some game. Get out the screws and start organizing your screws, you’ll see why in a minute. Switch the N64 again and now remove the top part. You will (probably) see a lot of coarse dust and other crap. But you will also find a lot of vines.

Remove all the screws…all the millions of them. kidding, kind of.. but take every life. Organize them all and take out the metal heatsinks and the shield until only the edge is left. Start your compressor and blow the board clean. The cartridge contact can be cleaned with a special cleaning kit or simply a paper towel with nail polish.

All plastic covers can be washed in the sink and cleaned with soap and water. Take the light lens thing and the metal pieces before you clean the bottom part so you don’t lose them. For the upper part you will have to take the cartridge spring out for a better cleaning. Tip: dry the plastic parts with compressed air, it dries quickly!

N64 Cleaning Cartridge

Now that everything is clean, you can start putting the N64 together. Place the metal shield back on the table and place the table with the shield back on the bottom. Then just put the heatsinks in metal parts on the table. Make sure the controller ports are clean before you put the face on. You can do this with a slightly damp paper towel.

Before resuming the top, erase the memory. Use the smallest game to open. So just clean the plastic and metal parts with soap and water, and it can’t be super dirty, but it’s a good idea to clean the metal contacts and also with some cotton swabs and nail polish, since the we disassembled anyway.

Now put the top part and screw it in place with the 6 screws. Then put the extra memory in a seal with the sticker as if it was nothing.

How To Clean N64 Games

You can give the N64 a nice shine with just WD40. Grab a paper towel and some WD40 and cover the N64. let it sit for a few hours and let the WD40 be absorbed into the plastic. After some time take a clean sponge and take the left on WD40 off and you have a nice fresh N64!

How To Make Your Nintendo 64 Cartridges Look Like New

A clean console needs clean cartridges. The cartridges are held together with only 2 Nintendo screws. use your game bit to remove it. Inside you will see 2 Phillips screws holding the metal shield together. Remove the cartridge and clean the metal and plastic parts with soap and water. Clean the table with some cotton swabs and nail polish. Note that there are some cartridges with a battery in them. Now is the time to change!

Before testing your N64, make sure it is completely dry, or else you could short out your N64 and who knows what will happen, anyway. After cleaning, test your console to see if it works. If it doesn’t work now, you may have broken something or it is still broken. In this case, you need to delve into the electronics to fix it. If it works, Congratulations, you have a working N64! You can take it a step further in cleaning your controller.

Turn the controller over and remove the 7 screws located on the back. Then there are 2 hidden screws in the expansion port. Now that it’s open, remove the 3 screws that hold the joystick in place and now the electronic parts will come out. Attach the elastic and clean the exterior casing and buttons with soap and water.

With cotton swabs and nail polish you can clean the rubber contacts. There are 3 types of rubber pads hidden in the board. You can easily remove and clean the rubber parts. Like the cartridge slot, you can clean this expansion slot with some paper towels and nail polish.

Cleaning & Repair

Now everything is clean, you can put it back together. Start by putting back the buttons with the elastic. Then put the table on top and try to put the left and right trigger there too. Then make sure the cable is not attached to a screw port. Then just screw everything together and you’re done! For extra cleaning/lubrication, use some WD40 on the joystick. If it still doesn’t work, you may want to replace the joystick. N64 games are great… when they work. Like all cartridge-based games, N64 games benefit from being thoroughly opened and cleaned every time. Air, a bottle of alcohol, and some tips will do the trick for most cartridges.

Until the development of CD-based consoles like the PlayStation, every gamer had to deal with cartridges. For a long time, cleaning your console’s cartridges and cartridge slot was just another job you had to do to keep your games in good condition.

Nintendo 64 game cartridges are some of the hardest to keep clean. Any gamer who grew up with the system will remember furiously blowing into their cartridges when their game failed to boot up.

How To Clean N64 Games

However, blowing into cartridges is not recommended and is often counterproductive, it just pushes dirt and debris further into the internal components. Since N64 game cartridges are no longer made, you need to know how to take care of them to maintain their longevity.

Lego Racers (nintendo 64, 1999) N64 Authentic Tested Clean Fast Shipping

Without further ado, here’s a foolproof guide on how to disassemble and clean N64 game cartridges so you can keep enjoying them for decades to come!

Depending on the depth of the cleaning job you want to do, you may need some or all of the following tools:

While removing your game cartridges may be more work than you’re used to, the only way to properly clean a cartridge is to open the plastic cover and access the circuitry underneath.

Congratulations, you have successfully disassembled an N64 cartridge! But don’t start celebrating yet – now begins the delicate process of cleaning the components.

Nintendo 64 Teardown

There are three main methods for cleaning the circuit board. What is most appropriate depends on how old the cartridge is and how long it has been since it was last cleaned.

So, if your cartridge looks like something Indiana Jones dug up, it’s due for a deep cleaning. Besides, your toys have done a lot for you, so the least you can do is give them the full spa treatment!

Using an air duster is a safe and effective way to remove dirt and other debris from your cartridges. Whether you use a can of compressed air or electronic dust removal equipment, all you have to do is blow into the bottom of the circuit.

How To Clean N64 Games

This method is much safer for your mouth-blown cartridge, since the circuit doesn’t have to swim in all the tiny moisture particles (or endure your breath, for that matter).

Mission Impossible Nintendo 64 N64 Original Game

If you’re trying to get a game working again, this method might do the trick. If the game is not working, you will have to pull up your sleeves and move on to methods two and three.

The copper metal contacts on the bottom of the circuit board are the part you need to clean, since they are the ones that interact with the console itself.

After you have finished cleaning, leave the circuit outside to dry for about five to ten minutes. You may be tempted

How to make n64 games, how to clean n64 cartridge, clean n64 games, how to clean n64 console, how to download n64 games, how to clean n64, how to play n64 games on pc, how to clean n64 controller, how to store n64 games, how to fix n64 games, how to play n64 games, how to clean games

Leave a Reply

Your email address will not be published.