How To Reset My Canon Printer

How To Reset My Canon Printer – Canon printer reset is to reset the printer after replacing the previous parts, so that the new parts that are installed can be read correctly. Examples of replacements that require reconfiguration are replacing the logic board assembly, carriage motor, carriage unit, print head, sheet feed unit, timing sensor unit, roller unit paper feed motor , paper feed motor, waste ink absorption kit, etc.

When the Canon printer has an error and needs to replace the part, after replacing the part, the next step is to restart the Canon printer so that the newly installed new parts can be read correctly. Of the many parts to be replaced, the most frequently replaced part is the waste ink absorber. When the waste ink absorber is full, after replacing the waste ink absorber, the next step is to reset the waste ink counter value.

How To Reset My Canon Printer

How To Reset My Canon Printer

According to the information in the Canon service manual, resetting the waste ink counter can be done in two ways, manual resetting and resetting with the service tool. For manual reset, it is done by pressing the Power/Home/On/Off button and pause/reset/restart for a certain amount of time.

Tutorial Reset Printer Canon Ip2770 Not Responding

It can be reset if the printer is in service mode. So after replacing the waste ink absorber, the next step is to put the printer into service mode. Once the printer is in service mode, the next step is to reset the printer (manual or service tool).

To put the printer in service mode, after the printer USB cable is connected to the computer/laptop and the printer is turned off, press and release the Power/Home/On/Off and Shutdown/Reset buttons. Do/Restart/Cancel. A certain amount that is done alternately. In principle, entering the service mode on all Canon printers is almost the same, resetting is done through the manual or service tool. Here’s how to enter service mode on a Canon printer.

Press the Stop/Restart/Resume/Cancel button x times. The values ​​of x are 2, 3, 5, and 6. Here are the differences in x values ​​for 2, 3, 5 and 6.

This post will discuss how to manually reset a Canon printer. While to reset the service tool, you can read about it in other posts on this blog.

Canon Pixma G3000 All In One Wireless Ink Tank Colour Printer

Reset the Canon printer using the manual method, after replacing the waste ink absorber, because an error occurs. The waste ink absorber is full.

Canon printers have two waste ink absorbers, namely the main waste ink absorber and the platen waste ink absorber. However, not all printers have two waste ink absorbers. Sometimes a printer only has one waste ink absorber, which is the main waste ink absorber. From the above list of printers, we will divide them into two categories, namely those printers that only have original waste absorbers and those printers that have both original and platen waste ink absorbers.

For printers with only the primary waste ink absorber, the reset is performed only on the primary waste ink absorber. In this post, for printers that only reset the original waste ink absorption, we discuss method #1.

How To Reset My Canon Printer

For printers with both original and platinum waste ink absorbers, the reset is performed twice, i.e. original waste ink absorber reset and platinum waste ink absorber reset. In this post, for printers that are reset with original and platen waste ink absorbers, we discuss method #2.

Pixma Mg3051 Wireless Connection Setup Guide

5). Press the Stop/Reset/Resume/Cancel button x times and then release both buttons at the same time (Stop/Reset/Resume/Cancel and Power/Start/On/Off). Read how to do step 5).

5). Press and hold the Stop/Reset/Resume/Cancel button 1 time, then press and hold the Stop/Reset/Resume/Cancel button 1 time, then release both buttons at the same time (Stop/Reset/Resume/Cancel and Power /Home/ON off).

Note: When the LED turns green or stops flashing, the printer has successfully entered service mode. If the LED continues to blink or glow orange, the printer has failed to enter service mode. Turn off the printer, then repeat the service mode operation procedure.

6). Insert paper (A4 or Letter), then press Stop/Reset/Resume/Cancel button 2 times, then press Power/Start/ON/OFF button to execute. Wait for the printer to print “Print EEPROM Information” before restarting. After the printer finishes printing, it will return to “Table 1. Menu Selection Mode”.

Easyfixs: Canon Mg2100, Mg2200, Mg3100, Mg3200, Mg4100, Mg4200 Series Error Ink Absorber Full, How To Fix It

When this operation is done, the LED will flash once, as if reset. After a successful reset, the printer will return to “Table 1. Menu Selection Mode”.

8). Insert paper (A4 or Letter), then press Stop/Reset/Resume/Cancel button 2 times, then press Power/Start/ON/OFF button to execute. Wait for the printer to print “Print EEPROM Information” after reboot. Compare “EEPROM INFORMATION PRINT” before and after reset. Look at the D value (amount of color of the waste). If after restart D=000.0 means restart was successful. After a successful reset, the printer will return to “Table 1. Menu Selection Mode”.

9). Press the Power/Home/On/Off button to turn off the printer, wait 15 seconds, and then turn on the printer. done

How To Reset My Canon Printer

5). Press and hold the Stop/Reset/Resume/Cancel button 1 time, then press and hold the Stop/Reset/Resume/Cancel button 1 time, then release both buttons at the same time (Stop/Reset/Resume/Cancel and Power /Home/ON off).

Easyfixs: Canon Ip4900 Series (ip4900, Ip4910, Ip4920, Ip4930, Ip4940, Ip4950, Ip4970, Ip4980) Ink Absorber Full Error [5b00] [1700]

Note: When the LED turns green or stops flashing, the printer has successfully entered service mode. If the LED continues to blink or glow orange, the printer has failed to enter service mode. Turn off the printer, then repeat the service mode operation procedure.

6). Insert paper (A4 or Letter), then press Stop/Reset/Resume/Cancel button 2 times, then press Power/Start/ON/OFF button to execute. Wait for the printer to print “Print EEPROM Information” before restarting. After the printer finishes printing, it will return to “Table 1. Menu Selection Mode”.

7). Press the Stop/Reset/Resume/Cancel button 4 times and then press the Power/Start/ON/OFF button to execute (enter the waste ink counter reset mode, see Table 1).

After entering the waste ink counter reset mode, follow the waste ink counter reset procedure. There are 3 types of reset procedures for waste color counters.

How To Factory Reset Canon Ibp622cdw Printer

To reset both the original color counter and the platinum counter (0%), press the Stop/Reset/Resume/Cancel button 2 times and then press the Power/Start/ON/OFF button to execute (see Table 2a ). When this operation is done, the LED will turn on. Flash once as the reset is done. After a successful reset, the printer will return to “Table 1. Menu Selection Mode”.

8). To reset the original waste color counter (0%), you don’t need to press the Stop/Reset/Resume/Cancel button, just press the Power/Start/ON/OFF button 1 time (see Table 2b).

To reset the platen waste ink counter (0%). Press the Stop/Reset/Resume/Cancel button 4 times, then press the Power/Start/ON/OFF button (enter the anti-waste ink reset mode, see Table 1) and then press the Stop button. Reset/Restart/Cancel 1 time (see Table 2b), then press the Power/Home/On/Off button. After a successful reset, the printer will return to “Table 1. Menu Selection Mode”.

How To Reset My Canon Printer

Time(s) Anti-Waste Ink Reset Procedure Remarks 0 times Reset the main waste ink counter (0%) 1 time Reset the plate waste ink counter (0%) MX7600, MP500, MP800, MP800R, Invalid plate waste ink counter (0%) for Pro9000, Pro95002 Only waste original ink absorber Valid for MX7600, MP500, MP800, MP800R, Pro9000, Pro9500

Fix E05 Canon Printer Error In 5 Easy Ways

8). To reset the original waste color counter (0%), you don’t need to press the Stop/Reset/Resume/Cancel button, just press the Power/Start/ON/OFF button 1 time (see Table 2c).

When this operation is done, the LED will flash once, as if reset. After a successful reset, the printer will return to “Table 1. Menu Selection Mode”.

Note: So, to reset the waste color counter, there are 3 different procedures. Use the procedure that corresponds to the printer that was serviced. For step 9) and so on, all printers are the same. So the difference occurs in step 8), which is when the waste color counter is reset.

9). Insert paper (A4 or letter), then press the Stop/Reset/Resume/Cancel button 2 times (see Table 1), then press the Power/Start/ON/OFF button to execute. Wait for the printer to print “Print EEPROM Information” after reboot. Compare “EEPROM INFORMATION PRINT” before and after reset. Look at the D value (amount of color of the waste). If after restart D=000.0 means restart was successful. After a successful reset, the printer will return to “Table 1. Menu Selection Mode”.

Canon Pixma G2000 Resetter Service Tool Download

Eleven). Press the Power/Home/On/Off button to turn off the printer, wait 15 seconds, and then turn on the printer. done

Q: Where can I get other Canon service tools? A: For complete information about Canon Service Tool collection, please open the Canon Service Tool version. Q: I don’t know which service tool is compatible with my printer, where can I find information about it? Answer: For complete information about Canon printers and service tools used, please open Canon Service Tools and the appropriate printer

A: For the discussion and solutions of this problem, please read the following post for Canon Service Tool Error Code (Error Code: 002, 005, 006, 007, 009 etc.)

How To Reset My Canon Printer

Anti-waste ink reset can be done in two ways, manually and using a service tool. For manual reset, divided into two methods (method #1 and method #2). For printers using method #2, step 8) is divided into 3 procedures. This post is written in reference to the Canon Printer Service Manual document. Canon is a big name when it comes to printers. Canon printers have internal gauges that regularly check the ink cartridge level for the printer. Automatically stop the printer printing when the ink reaches a low level. Sometimes the user complains that he cannot reset the Canon printer when he replaces the cartridge.

Fixed] Canon Canon Pixma Ts3350 Not Working On Windows 10/11

This problem usually occurs when you replace the ink cartridge with a new cartridge.

How to reset canon printer wifi, how to reset a canon pixma printer, canon printer reset button, canon printer reset tool, canon printer factory reset, reset canon printer, reset canon printer cartridge, how to reset canon pixma printer, how to reset canon printer, reset canon mp250 printer, how to reset canon mg3520 printer, how to reset a canon printer

Leave a Reply

Your email address will not be published.